Diamondback 2016 Grind BMX Bike
The 10/20 Hi Ten steel frame features pro spec geometry for a dialled ride. The 25x9t gearing is ideal for freestyle riding and the one piece cranks are stiff and strong. The 20” wheels feature tough double wall rims and are shod with freestyle tyres for just the right amount of grip.
Key Features:
- 10/20 Tubing with DB lazer cut seat stay brace & micro drop-outs
- Tektro alloy brakes
- DB one piece crank with 25t sprocket
- US Open type Bottom Bracket
- 20x2.00" Freestyle Tyres
Rider Sizing Guide:
- 3'7" - 4'0" 5 - 7 years - 16" Wheels
- 4'0" - 4'10" 7 - 11 years - 18" Wheels
- 4'10" - 6'4" 11+ years - 20" Wheels
Frame: Hi-Tensile 10/20 tubing with db lazer cut seat stay brace & micro drop-outs. Top Tube: 20.75", Chainstay:13.25"
Fork: Unicrown with tapered fork blades
Headset: 1.1/8" threadless
Bars: BMX Hi-Tensile 8" rise x 28.25" wide
Stem: DB MX2 Top Loader, Black
Front Brake: Tektro alloy sidepull
Rear Brake: Tektro alloy U-brake
Brake Lever: Alloy BMX 2 finger
Speed: 1
Cranks: DB one piece crank with 25t sprocket
Bottom Bracket: US Open type
Chain: KMC 410
Sprocket: 9T
Rims: Alloy 36H, Black
Front Hub: Diamondback Alloy , 36H with Small Flange, Black
Rear Hub: Diamondback Alloy Cassette Hub, 36H, 14mm axle, Black
Tyres: 20x2.00" Freestyle Pattern Front 20x2.00" Freestyle Pattern Rear
Seatpost: DB One piece combo saddle
Pedals: Diamondback Platform 9/16"
| Bike Type | BMX |
| Brake Type | Calliper |
| Colour | Yellow |
| Frame Size | 10" |
| Gender | Male
Female |
| Material | Steel |
| Speed | 1 |
| Suspension | None |
| Wheel Size | 20" |
CONDITION & SETUP
BRAND NEW - SUPPLIED BOXED READY FOR ASSEMBLY
Your bike will arrive brand new and sealed in its box and will be mostly built with the hard work already carried out in the factory. Once you open the box, fitting of the pedals, stem & handlebars, saddle & seat post, front wheel and front & rear brake cables will be required. We recommend that you carry out a general check over and tighten up of all fixings on pre-assembled parts (wheels, crank etc) once you have completed the build.
We also advise that the brakes will require some adjustment during assembly and again after they have bedded in for a short time. The gears of the bike (if present) may also require minor adjustments during setup and again after your first few rides.
If you are not confident of assembling the bike yourself then we would highly recommend you seek a local professional to complete the setup for you.
Leave a Review for
Diamondback 2016 Grind BMX Bike Yellow 20" Freestyle
To leave a review for a product you must be:
- logged into the site
- have bought the product at least once